Table of Contents
- 1 Are Stirling engines useful?
- 2 How much electricity can a Stirling engine produce?
- 3 Are Stirling engines more efficient than solar panels?
- 4 How much HP can a Stirling engine make?
- 5 How much energy can a Stirling engine produce?
- 6 Is there a low cost Stirling engine on Kickstarter?
- 7 Why do you need a regenerator in a Stirling engine?
Are Stirling engines useful?
Stirling engines are desirable for space power applications since they operate at the highest efficiency of any heat engine. This decreases fuel burnup, radiation levels, and the amount of heat that must be rejected by reactor.
Are Stirling engines powerful?
The engine used Stirling technology. The MOD II engine in particular could reach a thermal efficiency of 38.5% (significantly higher than a spark ignition ICE), and with power comparable to an ICE of the same size (83.5 hp).
How much electricity can a Stirling engine produce?
generating between 200-500 watts of electricity. Several designs were studied before settling on an alpha type configuration based around a two-cylinder air compressor.
How many horsepower can a Stirling engine produce?
Pump engines power output of 5 horsepower (3.7 kW) that can run a 3 kW generator or a centrifugal water pump.
Are Stirling engines more efficient than solar panels?
Stirling engines are significantly more efficient at converting sunlight into energy than most photovoltaic panels or concentrating solar power plants, whether parabolic trough or tower designs.
How much HP can a Stirling engine produce?
How much HP can a Stirling engine make?
Can a Stirling engine run a generator?
The Stirling engine design produces a turning movement, which runs an electrical generator creating electricity. Stirling engines are ideally suited for solar thermal power since this type of solar engine generator design requires the Stirling motor to be part of the collector assembly.
How much energy can a Stirling engine produce?
Why are Stirling engines are not more popular?
Here’s the Short Answer: Stirling engines are not good for applications that need to change their power output levels quickly, like cars for example. Stirling engines like to change their power output levels slowly. Plus, they tend to be heavier (and more expensive) than gasoline or diesel engines of a similar power output.
Is there a low cost Stirling engine on Kickstarter?
Low Cost Stirling Engine by Tim Sefton — Kickstarter Tim Sefton is raising funds for Low Cost Stirling Engine on Kickstarter! Develop and produce a low cost (less then $100) Stirling Engine that can generate electricity (ie output over 1KW of energy).
What happens to the gas tank in a Stirling engine?
Stirling Engine. Once the engine pressure drops below a certain value the tank releases gas into the engine until pressure is restored. If hydrogen is used one can even have an electrolysis device, which can produce hydrogen from water using electricity. This makes it easy to replace gas that has leaked.
Why do you need a regenerator in a Stirling engine?
A regenerator increases the efficiency of a Stirling engine by lowering the heat input requirement of the heater and the heat removal requirement of the cooler. It is not necessary to have a regenerator for the engine to run but in the interest of cost-reduction, especially where the cost of heater fuel is concerned, it is wise to have one.