Admin Table of Contents
What is the torque specs for the spindle axle nut?
For one-piece spindle nut systems, torque the nut to a minimum of 300 ft-lbs. Do not back off the spindle nut. Engage any locking device that is part of the spindle nut system. If the locking device cannot be engaged when the nut is at 300 ft-lbs, advance the nut until engagement takes place and the nut is locked.
What is the torque on the front axle?
For a double nut or jam nut system, bend the lock tab or install the set screw after the outer nut is torqued to 200 ft-lbs. For one-piece spindle nut systems, torque the nut to a minimum of 300 ft-lbs.
What are the torque specs on the front hub assembly?
The torque specifications for GM wheel hubs generally range between 107 to 225 foot-pounds, depending on the year and model.
How much torque should an axle nut have?
Also, in almost all cases, use a new axle nut. with no more than 15 to 20 ft. lbs. of torque while rotating the wheel to make sure the bearings are seated.
Do you need to torque axle nut?
Proper torque is critical for two reasons. First, it secures the axle nut so it won’t work itself loose and back off. Second, the proper torque keeps the correct load on a hub assembly needed for longer bearing life. When you’re removing the wheel hub nut, you can use an impact wrench to speed up the job.
Do you have to torque the axle nut?
Proper torque secures the axle nut and keeps the proper load on the hub assembly. Proper torque is critical for two reasons. First, it secures the axle nut so it won’t work itself loose and back off. Second, the proper torque keeps the correct load on a hub assembly needed for longer bearing life.
Should I torque axle nut?
What is the torque spec?
Recommended torque specifications are unique for each type of vehicle. By definition, torque refers to the amount of rotational force at the point of application. When attaching a wheel to a vehicle, torque specifications are the amount of force recommended on the hardware to ensure proper installation.