What transmissions bolt up to a Ford 460?

What transmissions bolt up to a Ford 460?

The 351m, 400, 429, 460 all bolt up to the C6 transmission without any adapters. But if you want a 429 or a 460 you need a kit for it to be able to fit into the engine bay without problems such as control arms, steering, exhaust, motor mounts, etc.

Is a Ford 460 diesel?

Premium Member. The gasoline big-block truck engines such as the Ford 460, GM 454 and Dodge 440 are all good heavy-duty engines, and all are gas-hogs.

Can you put a gas engine in a diesel truck?

As little as 1% gasoline contamination will lower the diesel flash point by 18 degrees C. This means the diesel fuel will prematurely ignite in the diesel engine, which can lead to engine damage. Gasoline contamination can also damage the fuel pump and mess up diesel injectors.

What diesel did Ford use in 1988?

For 1988, the diesel V8 from International (Navistar) was enlarged to from 420 to 444 cubic inches (6.9 to 7.3 L); this allowed for an increase to 180 hp (130 kW) and 365 ft⋅lbf (495 N⋅m) of torque.

Will a C6 transmission fit a 460?

No, C6 transmissions are engine family specific as the bellhousing & trans are a one piece casting ie, small block C6 will only fit Cleveland or Windsor, FE (390 etc) will only fit FE, & 385 series (429, 460 etc) will only fit these engines (but will also suit 351M & 400M).

What is a Ford 460?

The Ford 460 engine is Ford’s longest running big block V8, produced from 1968 until 1998. The 460 engine is a 7.5L big block V8 which produced power levels ranging from 197hp to 245hp over its 30 year history. Throughout the years Ford’s 460 engine received a number of updates, improvements, and complete redesigns.

What happens if I put gas in a diesel truck?

The flash point changes: When gasoline mixes with diesel, the first thing it does is change its flash point. This means that the diesel fuel will have a lower flash point and prematurely ignite in the engine which could lead to serious engine damage in the long run.

Is the 6.9 diesel a good engine?

The 6.9 was known for being simple in design & making great power at a low RPM (peak torque @ 1,400 RPM from a V-8 diesel). Though the performance of the 6.9 is far from today’s standards, it was a solid performer of its time and has a history of reliability & dependability.

What year was the 6.9 diesel?

International 6.9L IDI Diesel The 6.9L IDI was introduced for 1983 model year Ford 3/4 and 1 ton F-Series pickups. It was available with a 4 speed manual or 4 speed automatic transmission, though a 5 speed variant was offered during its last production year.

Will 390 heads fit a 460?

What kind of engine does a 1986 Ford F 350 have?

1986 Ford F-350 with the International 6.9L Indirect Injection Diesel Engine. Photo sent in by @ch_trucks on Instagram, the owner of @Chmobileautodetail in Texas.

When did the Ford 6.9L diesel come out?

In 1982, Ford did something revolutionary for the consumer truck market. They partnered with International Harvester to introduce the 6.9L IDI diesel engine in their heavy duty truck lineup. The 6.9L IDI diesel engine became an available option on 1983 model year trucks.

What kind of transmission does a Ford 6.9L have?

Two transmissions are used in the 6.9L IDI, the T19 BorgWarner 4-speed manual or Ford’s C6 SelectShift 3-Speed Automatic transmission. The 6.9L IDI Diesel Towing specs listed in the charts below are based on the 1986 model year.

What are the specs of a Ford 6.9L IDI diesel?

6.9L IDI Diesel Engine Specs Years: 1983-1987 Engine Oil Capacity: (With Filter Change 10 Quarts or 9.3 Liters Cooling System: Operating Temps: Pressurized Series Flow 188-195 Degree F Fuel: Diesel Fuel Capacity: 16.5 or 19 Gallon Front 19 Gallon (Behin