Admin Table of Contents
What is the torque spec for lug nuts?
80 to 90 ft-lbs
And when you look at that, and realize that the average torque required on a lug nut, to hold the wheel on, is 80 to 90 ft-lbs, well you can imagine how over-tightened some of these lug nuts are.
What size are Hyundai Sonata lug nuts?
21mm Hex
Dorman – Autograde – Wheel Nut M12-1.50 Standard – 21mm Hex, 18mm Length (sold by each) (Part No. 611-072)
What is the torque for wheel nuts in New Mexico?
The optimum torque value for your car or mounted rims can be found in the vehicle manual. It depends on the car model, rim size, design (aluminium or steel rims) and number of bolts. It is normally between 110 N⋅m and 120 N⋅m.
How do I know what to torque my wheels to?
Attach each lug nut by hand, and then use a manual torque wrench to tighten until you hear the ‘click’ sound that indicates you’ve reached the right amount of torque. The number—usually in the 75-100 lb-ft range—should be easy to locate in your vehicle’s owner’s manual.
What size are Hyundai lug nuts?
The Hyundai Elantra lug nut socket size is m12 X1. 50 with a 19mm hex. When You are adding or removing the lug nuts from a car then You will want to be careful not to damage them.
What size are the lug nuts on a Hyundai Santa Fe?
The lug nuts on a 2014 hyundai santa fe have a thread size of m12 x 1.50 And a hex size of 19 mm.
How tight should my wheel nuts be?
Lock-off. Once you have the correct setting dialed in, tighten the lock screw at the base. NOTE: Torque wrenches tend to be more accurate when they’re set to the middle of their range. This wrench goes from 28Nm to 210Nm – which is ideal for our wheel nuts, at about 90Nm.
What is the lug nut torque on a Hyundai Santa Fe?
Hyundai Santa Fe Year Lug Nut Torque 2013 65 – 79 lbf.ft 2014 65 – 79 lbf.ft 2015 65 – 79 lbf.ft 2016 65 – 79 lbf.ft
What are the torque specs for a Hyundai Accent?
Hyundai Lug Nut Torque Specs, All Models Make Model Trim Year Range Torque HYUNDAI ACCENT – ALL 13-INCH / GS/GL/L 1995 – 2018 80 ft-lbs ACCENT ALL 2019 View AZERA 17-INCH / LIMITED 2006 – 2016 80 ft-lbs ELANTRA – ALL ALL / P175/65R14 1992 – 2018 80 ft-lbs
Why do you need torque on a lug nut?
Using the proper torque helps ensure that the wheel assembly is securely installed. Using the manufacturer recommended torque also helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches.
How do you tighten a lug nut on an Acura?
The wheel rim must rest uniformly against the brake disc. Screw in the wheel bolts or lug nuts and evenly tighten by hand in a crosswise sequence in order to centre the wheel rim. Tighten the wheel bolts or lug nuts to the specified tightening toque in a crosswise sequence using a calibrated torque wrench.