What does a ribbon cable connect to?

What does a ribbon cable connect to?

A thin, flat, multiconductor cable that is widely used for internal peripheral connections in electronic systems. In a PC, a 34-wire ribbon connects the floppy drive (if present) to the motherboard. A 40-wire cable connects the IDE (ATA) CD drive, and an 80-wire cable is used for the IDE (ATA) hard disks.

What does ribbon cable do in a computer?

Ribbon cabling is used for data transmission and communications. It is often chosen for computer cable applications, where it is used as internal wiring for hard drives, CD drives, and more. Ribbon cables are also commonly used as internal wiring for other electronics and appliances.

Which two components could be connected together by an IDE cable?

IDE, an acronym for Integrated Drive Electronics, is a standard type of connection for storage devices in a computer. Generally, IDE refers to the types of cables and ports used to connect some hard drives and optical drives to each other and to the motherboard.

What is a ribbon cable called?

A ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. Ribbon cables are usually seen for internal peripherals in computers, such as hard drives, CD drives and floppy drives.

Which of the following devices attaches with a ribbon cable?

Ribbon cables are also known as multiplanar cables. Ribbon cables are usually seen for internal peripherals in computers, such as hard drives, CD drives, and floppy drives.

What is ribbon of a computer?

A ribbon is a command bar that organizes a program’s features into a series of tabs at the top of a window. A ribbon can replace both the traditional menu bar and toolbars. A typical ribbon. Ribbon tabs are composed of groups, which are a labeled set of closely related commands.

Which of the following components are used in IDE slots?

Which of the following components on the motherboard usually houses the IDE connectors? Answer: B – The South Bridge houses the IDE connectors. South Bridge is generally used for slower devices such as USB ports, IDE drives, and ISA slots.

What is SATA cable?

What are SATA Cables? Serial Advanced Technology Attachment (SATA) or Serial ATA cables are used to connect devices in computer cable assemblies, such as storage devices, for example. The SATA technology itself is a connecter interface primarily used for computer bus connections in storage applications.

What is IDC cable?

“An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the …

Where are the connectors on an IDE ribbon cable?

An IDE ribbon cable has three plugs – one for the motherboard and the other two for the connected drives. These days they’re colour-coded; the blue connector goes into the motherboard, the black connector – furthermost away from the blue end – is for master drive and the grey connector – in the middle – is for the slave drive.

Where is the key on the ribbon cable?

Each connector on the ribbon cable has a key in the middle. This key should fit into a slot in the middle of each connector of the motherboard and internal IDE peripherals.

Can you attach multiple ribbon cables to a SCSI card?

Some higher-end SCSI cards may have multiple internal ports that allow you to attach multiple ribbon cables. Each SCSI device must have a unique ID number; normally you can set these numbers by flipping rotary switches on external devices or by setting jumpers on internal ones.

How is the IDE cable connected to the motherboard?

Inserting the power cable connector improperly will damage the drive. The IDE cable connector is connected to an IDE cable. An IDE ribbon cable has three plugs – one for the motherboard and the other two for the connected drives.