Is fitting a toilet seat easy?

Is fitting a toilet seat easy?

Installing a new toilet seat is an easy DIY project. Whether you’re replacing yours because it’s old, or because you just want a new style, all you need are some basic tools and a few minutes. Unbolt the old seat, then pop the new one in place using the hardware included in your new toilet seat’s box.

How long does it take to install a toilet seat?

Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.

Do toilet seats fit all toilets?

No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.

How much does it cost to install toilet seat?

The national average materials cost to install a toilet seat is $47.78 per seat, with a range between $28.25 to $67.32. The total price for labor and materials per seat is $133.78, coming in between $106.05 to $161.52. Your actual price will depend on your location, job size, conditions and finish options you choose.

Are toilet seat fixing holes Standard?

Modern toilets have standard hole centres. Replacement toilet seat kits usually have adjustment to allow fitting to the older or non standard types as well. These are the key measurements that you need, although most seats are adjustable so that they will fit the most common toilet bowl shapes.

Do all toilet seats fit the same?

Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.

How do I know what toilet seat will fit my toilet?

Measure the width of the bowl at its widest point. Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.

How do I know what toilet seat I need?

Measure the length of the bowl from between the seat bolts to the outside edge of the front of the bowl. If you have a round bowl, this dimension should be about 16.5 inches. If you have an elongated bowl, the measurement should be around 18 to 18.5 inches.

Do plumbers install toilet seats?

For instance, replacing a toilet seat will take a handyman or plumber between 10 and 15 minutes while it might take you several hours the first time, i.e. when you buy the wrong shape seat and need to make a second trip to the store.

Is it easy to install a new toilet seat?

Installing new toilet seats can be a quick and easy task. Whether you need to swap out an old, broken seat or want to give your bathroom a fresh look with a new one, learning how to install a toilet seat is a matter of addressing a few simple steps. Item (s) have been added to cart.

What’s the last step in installing a toilet?

The last step for how to install a toilet is choosing the toilet seat. Since there are many types of seats and lids, make sure to select a toilet seat that will fit your toilet model. Elongated toilet seats are the most common seat type, since they’re more comfortable.

What kind of toilet seat should I get?

Most toilets are made of high-impact plastic or a plastic coating over wood, while enamel, natural wood, molded wood, bamboo and fiberboard are other options. Toilet seat shapes are generally either standard (round) or elongated. “Whisper close” lids have a popular design to prevent the seat from loudly slamming shut.

How to install a toilet to the floor?

Bolt Toilet to Floor 1 Place a washer and nut on each toilet bowl bolt and evenly tighten the nuts onto the bolts. 2 Alternate from one side of the toilet to the other as you tighten the nuts a little at a time. 3 If the bolts extend too far over the top of the washers and nuts, cut off the excess with a hacksaw.