Admin Table of Contents
How much soil will 10 yards cover?
A cubic yard of material can be spread to cover 100 square feet (10×10 foot area) at 3 inches of depth.
How many yards is a truck load of dirt?
A standard dump truck would most likely be used for your project, and they can typically carry 10 to 12 cubic yards of dirt in a truckload.
How much dirt do I need to fill a circle?
Radius in feet x Radius in feet x Depth in feet (inches divided by 12) x pi (3.14). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How much dirt do I need to fill a round hole?
Circular Area The radius of 5 feet is 2.5 feet (30 inches). Calculate the volume of dirt needed to fill in the hole using pi (3.142) times the square of the radius times the depth. For this example, you would multiply 3.142 by the square of 30 by 30 to obtain the volume.
Does grass grow in 2 inches of soil?
Grass roots grow between 4 and 6 inches long, so a layer of topsoil that’s 6 inches deep provides enough room for the roots to grow.
How many cubic yards of dirt to fill an inch?
Your result tells you how many cubic yards will fill one inch of depth. Applying that formula to the example above using 40 square feet, you would need .54 cubic yards: To give you a sense of volume, there are 27 cubic feet in one cubic yard (3′ x 3′ x 3′).
How big of an area do I need to add dirt?
Area to add dirt: 20 feet X 35 feet. You would like to add 5 ” of dirt. 20 X 35 = 700 square feet. 700 X .0154 ( from depth chart for 5″) = 10.78 or 11 cubic yards. How much will 1 yard cover? 1 yard @ 1″ will cover 322 square feet. 1 yard @ 2″ will cover 162 square feet. 1 yard @ 3″ will cover 108 square feet.
Is there a calculator for fill dirt?
Our fill calculator can help you figure out how much fill dirt you will need for your construction project. This cubic yard calculator works with top soil, mulch, gravel, dirt fill, clean fill, fill dirt.
How to calculate how many cubic feet of soil?
To get the amount of cubic feet of soil instead of cubic yards, you would take you measurements in feet & multiply the length x width x depth = how many cubic feet of product you need to fill the volume of this garden or raised bed.