# How many deck boards do I need for 200 square feet?

## How many deck boards do I need for 200 square feet?

You’ll need the dimensions of the deck boards you hope to use. If you are using 2- by 6-foot boards, for instance, the square footage of each board is 12 square feet. For the deck size example provided above of 200 square feet, you would need 18 boards of this size.

## How many shiplap boards do I need?

You will take the total square footage needed and divide it by the square footage of an individual plank to get the total amount of planks needed to complete your project. Back to my example: 96 sq ft / 9.33 sq ft = 10.28 boards. I would suggest always rounding up, so for this project I would order 11 or 12 boards.

How do you calculate tongue and groove boards?

Multiply the Square Footage x 12 and then divide by the amount of coverage (in inches) each piece of wood will cover. Example: How many linear feet of 1×6 tongue and groove lumber will it take to cover 500 square feet of ceiling?

How many square feet does a 16 foot deck board cover?

7.33 square feet
EXAMPLE: Say you’ve chosen the 16-foot standard width deck board. First, take the width (5.5 inches) and convert it into feet by dividing it by 12 inches, which gives you 0.45 feet. Then multiply 0.45 by 16 to get the board’s area: 7.33 square feet.

### How much does it cost to build a 10×20 deck?

2. Deck Cost Estimator by Size

Dimensions Total Square Feet Average Price Range
10×20 200 \$8,000 – \$12,000
12×20 240 \$9,600 – \$14,400
16×16 256 \$10,240 – \$15,360
14×20 280 \$11,200 – \$16,800

### How many square feet does a 16-foot deck board cover?

How do I figure out how many board feet I need?

To determine board feet for your project, take the desired board’s thickness, width and length, and multiply them together. From there, you need to divide it by 144 to determine the number of board feet you need.

How do you calculate square footage for shiplap?

How to Measure a Wall for Shiplap

1. Using a tape measure, measure along the bottom of your wall for the width, and from the floor to the ceiling for the height.
2. After finding the height and width, multiply them together to find the square footage of the area you wish to cover.

## How many square feet is a board?

one square foot
By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness.

## How much is tongue and groove per square foot?

Tongue and groove typically costs between \$1.25 — \$1.60 per linear foot, or around \$2.50 to \$3.00 per square foot.

How many boards are in a square foot?

By definition, a board foot is one square foot, one inch thick. The most common mistake made in calculating board footage is forgetting to multiply by the thickness. Example 1: A 4/4 board 8 inches wide and 8 feet long has 5.33 bd. ft.

How big is a board in square feet?

Unit Descriptions Unit Descriptions 1 Square Foot: Square foot (sq ft) is an 1 Board: An area of one inch by one foot

### How do you calculate the size of a wooden board?

All you need to do is use the board foot formula below: board feet = length (ft) * width (in) * thickness (in) / 12 Pay special attention to the units! The length of the wooden board should be expressed in feet, while the width and thickness – in inches.

### How big is 1×8 tongue and groove board?

You have 1,000 square feet of wall space that you would like to cover with a 1×8 Tongue and Groove board. The 1×8 in this case has an actual face width of 7”. Convert your square feet amount to linear feet. 1. 1,000 square feet X 12 = 12,000

How to calculate board feet in cubic inches?

By definition, one board foot of lumber is one square foot that is one inch thick. If you would like to convert regular volume units into board feet, use the following relation: 1 board foot = 144 cubic inches = 1/12 cubic foot How to calculate board feet?