Table of Contents
- 1 What does Cannot Print 70 mean?
- 2 How do I clear error messages on my Brother printer?
- 3 How do I reset my Brother printer?
- 4 How do I reset my Brother wireless printer?
- 5 What does it mean if an HP machine displays a 13 XX error?
- 6 Where is the reset button on a Brother printer?
- 7 What is the problem with my Brother printer?
- 8 Why are there black lines on my Brother Computer?
What does Cannot Print 70 mean?
The message ‘Print Unable 70’ or ‘Machine Error 70’ will appear on the display if there is a mechanical malfunction of the Brother machine or if there is paper jammed in between fuser rollers. To reset the machine, power the machine off using the power switch located on the right side of the machine.
How do I clear error messages on my Brother printer?
To clear these messages, follow these steps:
- Press the ON/OFF key to turn the Brother machine off.
- Unplug the Brother machine from the electrical outlet.
- Wait approximately ten seconds.
- Plug the Brother machine back into the electrical outlet.
- Press the ON/OFF key to turn the Brother machine on.
Why am I getting an error message on my Brother printer?
You can update or re-install the printer driver. According to many Brother Printer users, the Error State is often caused by the corrupting of the printer drivers. The technicians also suggest the same.
What is the cause for error unable to print 71 on a Brother machine?
Printer unable 71 is displayed on the screen when the motor is unable to attain its operating speed in a set amount of time. To resolve the brother printer error 71, you have to remove the motor from the bushing, clean it by applying lubricant of really lightweight machine oil. Otherwise, replace the unit.
How do I reset my Brother printer?
Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.
How do I reset my Brother wireless printer?
FAQs & Troubleshooting
- Press. (Settings) > All Settings > Network > Network Reset.
- Reset Network? will be displayed. Press Yes.
- Reboot OK? will be displayed. Press Yes for two seconds to confirm. The machine will restart.
How do I troubleshoot my Brother printer?
Follow the Best Troubleshooting Tips for Brother Printer: Try shutting down the printer and restart it if you encounter any problems in between periods. Periodically check the network / USB cable or USB port. Uninstall the old driver and reinstall the latest version of the printer driver.
What is the transfer unit on a printer?
The transfer unit is the part of the laser printing process that is responsible for transferring the image on the page before it goes through the fusing unit. Transfer units do eventually wear out and need to be replaced after an extended period of use.
What does it mean if an HP machine displays a 13 XX error?
PAPER JAM
13. XX PAPER JAM [LOCATION] Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken. Check the entire paper path for other pieces of media in the path.
[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].
Why is my Brother wireless printer not working?
The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver. Once you are able to print, enable your firewall again.
What does print unable 70 or’machine error 70’mean?
The message ‘Print Unable 70’ or ‘Machine Error 70’ will appear on the display if there is a mechanical malfunction of the Brother machine or if there is paper jammed in between fuser rollers. 1. To reset the machine, power the machine off using the power switch located on the right side of the machine.
What is the problem with my Brother printer?
The printer is unable to detect one of the ink cartridges. The printer is unable to detect one of the ink cartridges. The printer is unable to detect one of the ink cartridges. The printer is unable to detect one of the ink cartridges. There has been a malfunction of the main motor which drives all of the printing functions.
Why are there black lines on my Brother Computer?
Visit us at http://solutions.brother.com/. Check the chart below and follow the troubleshooting tips. Vertical black line appears in copies. Black vertical lines on copies are typically caused by dirt or correction fluid on the glass strip, or one or more corona wires are dirty.
Where to find brother Solutions Center for troubleshooting?
Most problems can be easily resolved by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com/. Check the chart below and follow the troubleshooting tips. Vertical black line appears in copies.